Cleaning Products

Biodet Mould Remover harnesses the power of natural anti-fungal, anti-septic, anti-bacterial, and anti-viral ingredients to effectively clean and inhibit mould on both hard surfaces and fabrics. Unlike bleach, which only masks the problem, Biodet kills mould spores at the source. Ideal for post-disaster clean-ups such as flood-affected homes, it’s safe for use on timber frames, gyprock linings, and more. It also helps neutralise musty and stagnant water odours, leaving treated areas fresher and healthier.

Staf is a hospital-grade aerosol disinfectant, deodorant, and air sanitiser, combining dual-quat technology and alcohol-based ingredients for broad-spectrum germicidal control. Formulated to kill 99.9% of bacteria, viruses, mould, and mildew, it’s effective on hard surfaces and in the air. With a unique micro-emulsion system, Staf lingers longer in the air for enhanced sanitisation. Ideal for use in nursing homes, hospitals, schools, offices, and air conditioning systems, it leaves a fresh, clean scent while eliminating odours and pathogens.

Cobra is a heavy-duty coil and fin cleaner designed to penetrate deep into evaporator and condenser coils, flushing away grease, oil, water scale, and grime. Available in both aerosol and liquid forms, Cobra’s foaming action reacts on contact to lift soil from deep within the coil. The liquid formula can be diluted and is self-rinsing when used on functioning units. Ideal for HVAC professionals, auto repairers, and commercial maintenance, Cobra delivers powerful cleaning with minimal effort.

Coil-Shine RTU is a ready-to-use heavy-duty alkaline coil cleaner formulated to remove bauxite, coal dust, dirt, grime, and oxidation from condenser and evaporator coils. Packed with surfactants, emulsifiers, and penetrating agents, it restores airflow and improves system efficiency by pulling contaminants out from deep within the fins. Available in both aerosol and trigger spray formats, Coil-Shine RTU is ideal for industrial maintenance, mining operations, and HVAC servicing.

Coil-Shine is a powerful concentrated alkaline coil and condenser cleaner, formulated to cut through oxidation, dirt, and industrial grime built up in air conditioning systems. Packed with surfactants and emulsifiers, it penetrates deep within coil fins to restore airflow and system efficiency. Ideal for commercial and industrial HVAC maintenance, Coil-Shine is a safer alternative to acid-based cleaners and can be diluted up to 25:1 depending on the level of build-up.

Taipan is a heavy-duty coil and fin cleaner designed to remove grease, grime, and built-up contaminants from air conditioner evaporator and condenser coils. Its foaming action penetrates deep between fins to lift soil to the surface for easy rinsing. Ideal for both residential and commercial HVAC systems, Taipan is also a highly effective degreaser for industrial kitchens and automotive applications.

Taipan Enzymatic Coil Klenz is a non-acidic coil cleaner formulated with enzymatic action and anti-microbial agents to break down organic contamination in air conditioning systems. Designed for slow, deep cleaning, it targets fats, grease, proteins, and starch residues while helping prevent mould and bacterial growth inside coils. Ideal for indoor and outdoor coils, heat exchangers, and permanent filters, it’s a safer, effective alternative to traditional acid-based cleaners.

Taipan Max is a concentrated heavy-duty foaming coil cleaner formulated with high-alkaline Sodium Hydroxide to break down grease, grime, mould, and debris from deep within evaporator and condenser coils. Designed to generate large volumes of foam for maximum cleaning action, it's ideal for extreme build-up in industrial HVAC systems. Suitable for multiple dilution rates based on cleaning intensity, Taipan Max delivers powerful results—but must be handled with care due to its high pH level (13–14).

Taipan Brite is a heavy-duty foaming coil cleaner formulated with Sodium Hydroxide to strip oxidation, grease, and grime from filthy outdoor coils and condensers. Designed to generate thick, expanding foam, it lifts contaminants from deep within the fins and restores surfaces to a bright metallic finish. Ideal for high-load HVAC systems and industrial cleaning, Taipan Brite should not be used where aluminium-safe products are required. Dilutable for light to extreme cleaning tasks.

Taipan Universal is a lavender-scented, low-foam coil cleaner that combines the power of a degreaser, detergent, and deodoriser in one versatile formula. Developed for use in kitchens, restaurants, and any environment where grease-laden air contaminates evaporators and coils, it effectively breaks down grime while leaving a fresh scent. Ideal for use on condensers, evaporators, and components like filters and fan blades, it can be used with or without rinsing depending on the application.

Green Cobra is a biodegradable, non-flammable alkaline coil cleaner designed for use on evaporators, condensers, and fins in air conditioning and refrigeration systems. Formulated with advanced phosphate ester technology, it helps prevent corrosion while removing grease, oxidation, lint, and baked-on residues. Safe for use in transport fleets, electrical infrastructure, and commercial HVAC systems, Green Cobra delivers powerful cleaning with environmental peace of mind.

RTU Green Cobra is a ready-to-use alkaline cleaner for evaporator coils, condensers, and fins, designed to remove heavy deposits of grease, grime, soot, mould, and nicotine residue. Formulated with phosphate ester technology to minimise corrosion, it’s safe on aluminium and mild steel surfaces and helps restore coil brightness and airflow. Ideal for HVAC systems in transport, hospitality, and industrial settings, it’s effective straight from the bottle or diluted 1:1 for light cleaning.